SET UP / PARTS LOCATION
1. Main Tank with Glass Lid
2. LED Light
3. Back Filter Box
4. Replaceable Filter Sponge
(Item #RC24ECO-RFS)
5. Media Trays
6. Protein Skimmer Location
7. Return Pump Location
8. Cabinet Stand
INSTALLATION
Your aquarium will be in 2 separate boxes, one will contain the aquarium and all the
included accessories, the other will include the matching cabinet stand. Follow the
instructions for the stand assembly and then place the stand in the desired location on a
flat, level surface. Next, remove the glass aquarium from the packaging and carefully place
the aquarium on the cabinet stand. Ensure the aquarium is centered on the stand. Follow
the Installation Diagram for the LED Light, Sponge Block, Protein Skimmer and Return
Pump.
KNOW YOUR EQUIPMENT
Read and follow all the instructions, even if you feel you are familiar with the product. Find a place
to keep the instructions handy for future reference. Your attention should be drawn particularly to the
sections concerning “IMPORTANT SAFEGUARDS” and the “GUARANTEE CONDITIONS”. Please
ensure you retain your original purchase receipt in the event that guarantee service is required.
Carefully unpack the aquarium making sure you keep all the packing material until all the parts of
the product have been found and the product has been assembled. This product is shipped to you
in a factory sealed carton. Should the product malfunction in any way or if the unit is damaged and
requires replacement, contact the retailer where the product was purchased for inspection.
REPLACEMENT PARTS AND FILTER MEDIA
Use Aquatop Genuine Spare Parts Only. See your local Aquatop Dealer and refer to the spare
part numbers listed in the instructions supplied with the accessories.
PREPARATION
2
3
4
8
6
5
7
1
3
4
⁕
Image shows back of aquarium
⁕
Image shows back of aquarium
