IsACQ210NMSC-0 (ENG) Rev. 250708-0
3 -16
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com
The conductivity value is one of the most important parameters of a soft water aquarium
for the survival of fish and plants. This value is usually expressed in µs/cm (if the value
exceeds 10,000
µs/cm
, it is expressed in
mS/cm
).
Aquatronica
’s Low-Range Conductivity Interface connects an Aquatronica conductivity
probe to the “Aquarium Controller” system to measure and control the conductivity in
aquariums.
Pack contents
You will find:
One low conductivity probe connection interface.
•
One BUS cable for connecting the interface to the power unit
•
One bag of accessories containing: 1 fixing bracket – 1 kit of cable diameter adaptor
•
1 guard – 2 fixing screws
English
Connection to “Aquarium Controller” system
1. Connect the low conductivity probe’s connector to the interface (ACQ210N-MS).
2. Connect the ACQ210N-MS interface to the power unit (or HUB) using the provided
BUS cable.
NOTE: Insert the correct end of the connector into the power unit; inserting it in
the other direction can seriously damage the equipment.
Connection diagram
LOW CONDUCTIVITY
PROBE
ACQ210N-MS
BUS CABLE
DIAMETER
ADAPTORS
FASTENING
BRACKET
PROTECTION
CAP
BUS CABLE
