Unscrew all 4 diagonal
strengthening supports and
the 2 long sides of the box
while someone is holding
the TV upright.
STEP 1
Unscrew the top panel and
remove the upper protective
foams from the top of the TV.
STEP 2
Unbox the handling straps
provided and place under
the TV. Lift gently while still
holding the TV upright.
STEP 3
Gently lift TV out using
straps and place on the
floor while still being held
upright.
STEP 9
B
DETAIL B
SCALE 1 : 5
Lower the protective cover
from the top of the screen
to reveal the front feet
mounting positions.
STEP 5
Install the feet using the 6x
hex bolts provided and 4x
bolts from the back of the
TV.
You will need a 2.5mm Allan Key.
B
DETAIL B
SCALE 1 : 5
STEP 7
Unscrew the remaining
wooden side panels while
ensuring the TV is secure.
STEP 8
Fit the rear support stand to
its mating clevis pin on the
back of the TV and rotate
clip to attach over the clevis.
STEP 10
Hook the wire straps to the
rear support leg and then to
the small mating clevis pins
on the bottom of the TV.
STEP 11
Remove the black thumb
nuts from the ‘L’ shaped
panel.
STEP 12
Insert cables up from
behind the rear support
leg into the connector
area and insert all
connections as required.
Replace ‘L’ shaped cover
panel when finished and
screw in the black thumb
nuts to secure.
STEP 13
Remove the 2x hex bolts
(per foot) from the back of
the television.
You will need a
2.5mm Allan Key.
A
DETAIL A
SCALE 1 : 5
STEP 6
Insert the upper protective
foams between the TV and
the lower foams to raise the
television up. Ensure the
profile cut out matches the
TV frame.
STEP 4
