3) Open the plug on the outside wall of the spa. Screw one end of the inflation hose onto it.
3
4) Remove the plastic plug from the socket on the inside wall of the spa; the water then flows.
5) When there is no more water in the spa, you must operate the blower function for 2 to 3 minutes,
pressing the "BUBBLE" button, in order to drain the water that is in the piping.
6) When the drainage is complete, remove the inflation hose and tighten the nut securely.
6.4.
Spa cleaning
Detergent residues, dissolved solids from swimsuits and chemicals gradually accumulate in the spa
water. To clean the spa, use soap and water, then rinse.
Note
: Do not use hard brushes or abrasive cleaners.
21
