6
1~
3m
m
Prepare inlay for installation:
Carefully cut and remove V-notch
material from inlay (A).
Thoroughly clean and dry inlay to
maximise adhesive bond strength (B).
ENSURE INLAY IS FREE FROM
DUST, OIL , DEBRIS AND
COMPLETELY DRY BEFORE
CONTINUING.
To cut inlay material to size:
Place inlay material in desired layout
on a flat surface.
Carefully cut to correct size to suit
V-LOCK Lid (A). (See Page 2)
To mark V-notch cut-out:
Place inlay material with preferred
surface facing upwards.
Position Spacer Plate on inlay material.
Align & centre V-notch edge of Spacer
Plate with selected edge of inlay (A).
Mark V-notch cut-out profile (B).
FOR INLAYS 1~3mm THINNER THAN
INTERNAL LID DEPTH
To apply adhesive :
Insert V-LOCK Adhesive into caulking
gun & cut nozzle to provide a
minimum 6mm wide bead.
Apply a generous, even bead across
entire internal surface of Lid (A).
LID INLAY INSTALLATION - STONE/TILE
1
2
3
4A
•
•
•
•
•
•
•
•
•
•
