Please read these
instructions carefully
and keep them in a
safe place (preferably
close to the module)
for future reference.
These instructions
must be followed
carefully to ensure
proper operation.
AquiNet
Fieldbus Network System
A. GENERAL INFORMATION
Zone Control M
odules
(ZCM)
can be added to any leak detection device with volt free contacts.
When the relay changes over, a signal is sent via the fieldbus network to a master generator.
Each master generator can monitor up to 1
0
0
ZCM'
s. Multiple generators can also be linked to
create very large networks. The master generator interfaces with a touch screen panel that
runs the graphical user interface (GUI) which displays alarms and current system status. The
GUI can be tailored specifically to the client’s requirements.
LEAK DETECTION SOLUTIONS
A
qui
N
et
Weights & Measures House, 20 Barttelot Road,
Horsham, West Sussex RH12 1DQ
+44 (0) 1403 216100
info@aquilar.co.uk
www.aquilar.co.uk
1
INSTALLATION ITEMS
(NOT SUPPLIED)
• Wall fasteners for surface mounting.
TOOLS REQUIRED
• Drill or hole punch for electrical
conduit entries
• Phillips (cross-head) screwdriver
• Small flat-head screwdriver
STORAGE
Keep the module in a dry place prior to
installation to avoid possible damage to
internal components.
AQUINET
230Vac. 3A unswitched fused spur
OUTPUTS
BACnet / IP / Modbus / TCP / Optional volt
free contacts
B. PRODUCT INFORMATION
TFT
7” LCD 32K Colour 800x480 pixels.
NEMA 4 / IP65 front panel.
Resistive analogue touchscreen
Software stored in non-volatile flash memory
ENCLOSURE
H 330 x W 292 x D87mm
C. TOPOLOGY
The topology of a bus system is the definition
of which type of cable routing is allowed.
AquiNet features a completely free topology
Star
Ring
Line
allowing the network to be established as a
line, ring, star or a combination of these.
