LEAK DETECTION SOLUTIONS
9
Unit 30, Lawson Hunt Industrial Park,
Broadbridge Heath, Horsham, West Sussex,
RH12 3JR
+44 (0) 1403 216100
info@aquilar.co.uk
www.aquilar.co.uk
K3. MANUAL OVERRIDE
Home Screen>>Menu>>Manual Override
Figure 14 -Manual Override Screen
Note:
Caution should be taken before enabling
the manual override as this means the system
will not go into alarm for the selected time period and
your building will not be protected.
Pressing the on button enables the override. There are
four pre-set override time periods available. 15, 30, 45
and 60 minutes. These are selected by using the up or
down arrow.
Once a time period is selected the status LED will
change to blue and a countdown begins and runs for
the selected time period. Once this has reached zero
the status LED will return to green and the system will
automatically go back to normal operation.
Manual Override can be cancelled at any time by pressing the cancel button. The system will then revert back to normal operation as per
the programmed parameters.
K4. EVENT HISTORY
Home Screen>>Menu>>Event History
Figure 15 - Event History Screen
The events history contains information on any alarms
and programming/setup changes. The system will
retain the last 1000 events. Once this is full the oldest
events will drop off the list as new ones are recorded.
All events recorded have a date and time stamp and
are ordered according to this. With the most recent
events listed first at the top of the list.
Use the arrows beside the events screen to scroll
through to older events.
Important Note:
For accurate recording of events, the
date and time must be set up accurately on the system
during commissioning (
)
