ELECTROMECHANICAL CONTROL PANEL
Page 9
4.
REGENERATION CYCLE:
The length of the brine/slow rinse cycle has been
preset; it should only be adjusted by a technical service
person.
Turn the timer knob (K) counter clockwise until the
regeneration cams (I) are accessible;
loosen the locking screw (H);
rotate the upper cam:
-
clockwise: to extend the cycle time (max. 60
min); do NOT rotate the upper cam too far, the
outer edge of the cams should form 1
continuous section!
-
counter clockwise: to shorten the cycle time
(min. 30 min);
secure the locking screw (H).
