DEFRA Stove Installation and User Guide
• Insert throat plate assembly into the fire box and manoeuvre so that
the throat plate drops into the landing plate cut- outs.
• Raise the throat plate assembly vertically out of the landing slots
ensuring the front edge remains behind the front edge of the air
wash lip, see fig 4.
• Hook the throat plate "T" cut-out onto the support hanger and push
back to slide onto the secondary air tube; the wood tray will hold
the bottom edge into the correct position.
Figure 4: Throat plate support and secondary air pipe.
2.7
Assembling the grate bars
In a multi fuel stove the grate comprises of a series of cast iron grate
bars, seated on a pair of combs. All bars in the grate are identical.
In stoves with a riddling grate system the bars should be seated with
every other bar rotated 180 degrees, so the ends marked ’H’ and ’L’
alternate on each comb. When assembling the grate, fit bars to the low
sections of the comb first by seating the ends marked ’L’ onto the low part
of the comb, whilst the ends marked ’H’ should then be seated on the high
sections.
BK575 Rev02
7