Installation
VECTOPOWER® VP600....
Modified: 2016.10.12 by Andreas Mangold
Printed: 2016.10.12
VECTOPOWER_VP0x00_xxxA1_Wx_xxx_Installationsanleitung_v1_20_en.doc
85
ARADEX
ARADEX
AG
ARADEX-AG
Ziegelwaldstr. 3
73547 Lorch Germany
Tel.: + 49/ (0)7172/ 9181-0
Hotline:
Fax: + 49/ (0)7172/ 9181-91
E-Mail: info@aradex.com
http:/ / www.aradex.com
+ 49/ (0)700-
U
+
-
V
W
U
+
-
V
W
U
+
-
V
W
U2
+
2
-
2
V2
W2
U1
+
1
-
1
V1
W1
Figure 68: Contacting for the DC link and the motor phases
5. Screw the wire terminal together with the supplied M8 screw using the Nord-
Lock
®
wedge lock washer.
6. Screw the screw fitting into the housing. Make sure that the cable shield fits cor-
rectly and lies flat, in order to prevent the device from leaking.
7. Visually check that the seal fits correctly. The sealing ring must fit all around in the
provided groove. Insert the cover again and screw it in.