© 2016 Araknis Networks
®
33
Araknis Networks Wireless Access Point
Product Manual
LAN Settings
Configuration Instructions –
1. Click
Settings, LAN
.
2. Specify the IP settings.
3. Click
Save
, then
Apply Changes
to enable the new settings.
14.2 - Interface Settings
The Interface Settings menu is used to configure LAN speed and duplex settings.
Figure 27.
Interface Settings
Path –
Settings, LAN, Interface Settings
Parameters –
• Speed –
Select LAN speed from Auto, 1Gbps (300/500/700 Series only), 100Mbps, 10Mbps,
Disable (turns the LAN Port OFF)
Default: Auto
• Duplex –
(10/100Mbps modes only) Select the duplex setting between the access point and the
network router from Half or Full.
Default: Full
Configuration Instructions –
1. Click
Settings, LAN
.
2. Specify the interface settings.
3. Click
Save
, then
Apply Changes
to enable the new settings.