© 2016 Araknis Networks
®
47
Araknis Networks Wireless Access Point
Product Manual
Security Settings
16.2 - Access Control
Allows configuration of how the access point interface may be accessed.
Figure 37.
Access Control
Path –
Settings, Security, Access Control
Parameters –
• HTTP Port –
Enter device web server port to connect.
Default: 80
Pro Tip –
Assign a unique port number to enable remote access to the access point web
interface via port forwarding on the network router.
• Web Access –
Select Enable or Disable to enable or disable the ability to modify the device via
Web Browser.
Default: Enable
Caution –
Disabling web access will cause a loss of connection to the web interface. If this
occurs, regain connectivity by restoring the hardware to factory default settings. (Press Reset
button for 10 seconds.)
• Telnet –
Enable or Disable the ability to modify the device via a command line interface (CLI)
through a telnet session.
Default: Enable
• SSH –
Enable or Disable the ability to modify the device via a command line interface (CLI) with a
secure channel.
Default: Disable
Configuration Instructions –
1. Click
Settings, Security
.
2. Specify the access control settings.
3. Click
Save
, then
Apply Changes
to enable the new settings.