© 2016 Araknis Networks
®
67
Araknis Networks Wireless Access Point
Product Manual
Advanced Menu
23.3.1 - Connecting a Device Using WPS via Push Button
Specific Setup Requirements
• Client device equipped with WPS Push Button
• Administrator access to the WAP interface
Configuration Instructions –
1. Power on the WPS enabled client device to be connected.
2. Log into the WAP local interface as an administrator and navigate to Advanced, WPS. Enable
WPS if it is disabled (remember to complete the Apply Settings process).
3. Press the WPS button on the client device, then click the WPS via Push Button Start button in the
WAP interface.
4. The device will connect. Test connectivity to the device to ensure WiFi operation. WPS-connected
devices will appear in the Wireless Interface Status page Connected Clients list.