© 2016 Araknis Networks
®
81
Araknis Networks Wireless Access Point
Product Manual
Appendix
Step 3 – Configure the Router
1. Log in and go to the Advanced VLANs menu.
2. Click Add to create a new VLAN entry.
3. Configure the settings for the VLAN:
A.
VLAN ID –
Enter the same ID number for the guest VLAN as used in the other devices (VLAN
2 in this example).
B.
Description –
Enter the same information used in the VLAN Name field of the managed switch.
C.
Inter VLAN Routing –
Set to Disabled for a guest network so guests don’t get access to the rest
of the network.
D.
Device Management –
Select Disabled so that guest clients can’t access the router management
interface.
E.
Route Binding –
Set whether routes use the WAN1 or WAN2 port. Leave set to none for link
failover.
F.
LAN1/2/3/4 –
Set all LAN ports to “Tagged” using the dropdowns.
4. Click Apply to save the settings. Configuration is complete.
Step 3 – Test the Guest Network
To test guest network functionality, connect a device to the SSID and confirm that the IP address issued
is on the new VLAN subnet.
Next, move around the job with the connected device. You should see the client device listed in each
WAP’s Connected Clients table (Path: Status, Wireless Interface) as you move around the job.