© 2016 Araknis Networks
®
73
Araknis Networks Wireless Access Point
Product Manual
Advanced Menu
23.6 - Wireless Traffic Shaping Settings
Traffic shaping is used to regulate packet flow to control wireless network saturation and reduce latency.
Figure 64.
Wireless Traffic Shaping Settings
Path –
Advanced, Traffic Shaping
Parameters –
Note –
The 100 Series will indicate settings and information for the 2.4GHz channel. The
300/500/700 Series will indicate settings and information for the 2.4GHz and 5GHz channels.
• Enable –
Select to enable Traffic Shaping on the 2.4GHz and/or 5GHz band.
• SSID –
Indicates the network to which Traffic Shaping will be applied.
• Interface –
Indicates 2.4GHz or 5GHz band.
• Download Limit –
Enter a value to regulate download speed. RANGE: 1-999Mbps.
Default: 100Mbps.
• Upload Limit –
Enter a value to regulate upload speed. RANGE: 1-999Mbps.
Default: 100Mbps.
Configuration Instructions –
1. Click
Advanced, Traffic Shaping
.
2. Specify the wireless traffic shaping settings.
3. Click
Save
, then
Apply Changes
to enable the new settings.