C.15 Option 34: NTP/PTP Server
175
DESCRIPTION “”
::=
{
ntpsys 7
}
ntpSysClkWander OBJECT-TYPE
SYNTAX MilliUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION “”
::=
{
ntpsys 8
}
ntpSysRootDelay OBJECT-TYPE
SYNTAX MilliUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION “the total roundtrip delay to the primary
reference source at the root of the synchronization
subnet, in seconds”
::=
{
ntpsys 9
}
ntpSysRootDispersion OBJECT-TYPE
SYNTAX MilliUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION “ the maximum error relative to the primary
reference source at the root of the synchronization
subnet, in seconds. Only positive values greater
than zero are possible”
::=
{
ntpsys 10
}
ntpSysLeap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION “ two-bit code warning of an impending leap
second to be inserted in the NTP timescale.”
::=
{
ntpsys 11
}
ntpSysStratum OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION “ indicating the stratum of the local clock.
0, unspecified
1, primary reference (e.g.,, calibrated atomic clock,
radio clock)
2-255, secondary reference (via NTP)”
Summary of Contents for 1092A
