- 60 -
BIOS
3.5 Security
Set Administrator Password
Version 2.14.1219. Copyritght (C) 2011 American Megatrends, Inc.
Advanced
Chipset
Boot
Security
Save & Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
: Select Item
: Change Opt.
+/-
: Previous Values
F2
: General Help
F1
: Save & Exit Setup
F10
: Exit
ESC
: Select Screen
: Select
Enter
: Optimized Defaults
F9
Password Description
If ONLY the Administrator’s password is set,
If ONLY the User’s password is set, then this
then this only limits access to Setup and is
only asked for when entering Setup.
is a power on password and must be entered to
boot or entre Setup. In Setup the User will
The password length must be
3
Minimum length
in the following range:
have Administrator rights.
20
Maximum length
Administrator Password
HDD Security Configuration:
HDD 0:GLS85LS1008A
Administrator Password
Use the Administrator Password to set or change a administrator password.
ENTER PASSWORD
Type the password, up to eight characters in length, and press <Enter>. The
password typed now will clear any previously entered password from CMOS
memory. You will be asked to confirm the password. Type the password again
and press <Enter>. You may also press <ESC> to abort the selection and not
enter a password.
To disable a password, just press <Enter> when you are prompted to enter
the password. A message will confirm the password will be disabled. Once
the password is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED
When a password has been enabled, you will be prompted to enter it every
time you try to enter Setup. This prevents an unauthorized person from
Summary of Contents for EasyBoard-650E
