BIOS
- 46 -
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
1Ah
1Bh
1Ch
1Dh
1Eh
1Fh
20h
21h
22h
Reserved
Disable PS/2 mouse interface (optional); Auto detect ports for
keyboard & mouse followed by a port & interface swap (optional);
Reset keyboard for Winbond 977 series Super I/O chips
Reserved
Reserved
Reserved
Test F000h segment shadow to see whether it is read/write capable
or not. If test fails, keep beeping the speaker
Reserved
Auto detect flash type to load appropriate flash read/write codes into
the run time area in F000 for ESCD & DMI support
Reserved
Use walking 1 s algorithm to check out interface in CMOS circuitry.
Also set real time clock power status and then check for override
Reserved
Program chipset default values into chipset. Chipset default values
are MODBINable by OEM customers
Reserved
Initial Early_Init_Onboard_Generator switch
Reserved
Detect CPU information including brand, SMI type (Cyrix or Intel) and
CPU level (586 or 686)
Reserved
Reserved
Initial interrupts vector table. If no special specified, all H/W interrupts
are directed to SPURIOUS_INT_HDLR & S/W interrupts to
SPURIOUS_soft_HDLR
Reserved
Initial EARLY_PM_INIT switch
Reserved
Load keyboard matrix (notebook platform)
Reserved
HPM initialization (notebook platform)
Reserved
'
BIOS
- 45 -
3.15 BIOS memory mapping
3.16 Award BIOS Post Codes
CFh
C0h
C1h
C3h
C5h
01h
02h
03h
04h
05h
06h
07h
08h
Test CMOS read/write functionality
Early chipset initialization: Disable shadow RAM, L2 cache (socket 7
and below), program basic chipset registers
Detect memory: Auto detection of DRAM size, type and ECC, auto
detection of L2 cache (socket 7 and below)
Expand compressed BIOS code to DRAM
Call chipset hook to copy BIOS back to E000 & F000 shadow RAM
Expand the Xgroup codes located in physical memory address
1000:0
Reserved
Initial Superio_Early_Init switch
Reserved
Blank out screen; Clear CMOS error flag
Reserved
Clear 8042 interface; Initialize 8042 self test
Test special keyboard controller for Winbond 977 series Super I/O
chips; Enable keyboard interface
Address
00000h-9FFFFh
A0000h-BFFFFh
C0000h-CFFFFh
D0000h-DFFFFh
E0000h-FFFFFh
Device Description
DOS Kernel Area
EGA and VGA Video Buffer (128KB)
EGA/VGA ROM
Adaptor ROM
System BIOS
The following codes are not displayed on the screen. They can only be
viewed on the LED display of a so called POST card. The codes are listened
in the same order as the according functions are executed at PC startup. If
you have access to a POST Card reader, you can watch the system perform
each test by the value that's displayed. If the system hangs (if there's a
problem) the last value displayed will give you a good idea where and what
went wrong, or what's bad on the system board.
Summary of Contents for EmCORE-v7002
