Page 2
C O N N E C T I N G T H E M E D A L L I O N S T O T H E H E A D E R S
We recommend installing the medallion on the header
prior to final assembly. Needle nose pliers can be help-
ful in holding the 1/2” nail.
STEP 1
1
C O N N E C T I N G T H E B R A C E S T O T H E H E A D E R
Install all 4 braces on the ends of the headers
into the pre-drilled holes using 2” screws.
Important note:
Placing screws into pre-drilled holes ensures proper align-
ment of side panels.
STEP 2
2
C O N N E C T I N G T H E S I D E P A N E L T O T H E H E A D E R S
Line up the top of the brace and the top of the side panel.
Position the side panel against the back of the brace.
Connect the side panel to the header using the 2” wood
screws.
Connect the brace to the side panel using 2 1/2” wood
screws.
Repeat on both ends of the header.
Important note:
When positioning side panel for attachment to header make
sure the staples in side panel lattice face to the
outside
of
arbor.
STEP 3
3
2 1/2” screws
2 ” screws
