www.matermacc.it
Use and maintenance handbook
Page 06
1.4. STORAGE
If the machine is stopped for long periods, it is necessary to
store it in a place protected from atmospheric agents and
protect it in order to avoid damaging.
Before storage it is advised to clean all the machine carefully
and lubricate all the mechanical units adequately in order to
protect it from rust.
Verify that the storage temperature is comprised between 0
°C and 50 °C.
Before stopping the machine for long periods, it is opportune
to operate as follows:
•
wash the equipment with abundant water, in parti-
cular the chemical substances tanks, then dry it;
•
check it carefully and replace any damaged or worn
parts;
•
grease all the mechanical units, the blocking hinges;
• grease the transmission chains, grease all the
transmission chains, use a lubricant over all the non
painted parts;
•
keep the machine in a sheltered area, if possible, on a
flat a strong surface;
•
verify the correct blocking of all nuts and bolts;
•
protect the equipment with a cloth;
1.5.
FIRST USE OR RESTART AFTER A LONG
PERIOD OF INACTIVITY
Before using the machine for the first time or after along pe-
riod of inactivity, it is necessary to carry out what follows:
•
verify that the machine has no damaging;
•
verify the mechanical units that must be in good sta-
te and not rusted;
•
verify the correct functioning of the light bars (if pre-
sent);
•
grease carefully all the mobile parts;
•
verify that not there are leakages of oil coming from
connections or pipings;
•
verify that all the protections are placed correctly;
1.6. SCRAPPING
In case of scrapping, the machine will have to be disposed
in specific rubbish dumps, in keeping with the enforced le-
gislation.
Before proceeding to the scrapping, it is necessary to separate
the plastic or rubber parts.
Recuperate any exhausted oils and dispose them in the
appropriate collection centres.
The used oil must be opportu-
nely recuperated and not disper-
sed in the environment as accor-
ding to the enforced norms it is
classified like dangerous waste
and as such it must be sent to the
specific collection centres.
For the collection of exhausted oils, it is obligatory to refer to
the “
Obligatory Consortium of Used Oils
”.
The parts made up only from plastic material, aluminum, ste-
el, can only be recycled, if collected in the specific centres.
Summary of Contents for Unica Super
