www.matermacc.it
Use and maintenance handbook
Page 16
For the coupling of the tractor to the machine, the operator
must move the tractor with the reverse gear until it reaches
the connections on the machine with the back lifters (Fig.
4.1).
•
Action the parking brake of the tractor, switch the engi-
ne off, remove the ignition key and step down.
•
Insert the hinges and the relative plugs/safety forelocks.
•
Connect the third point (tightener) of the machine to
the tractor, lift the machine until the power of the ma-
chine and tractor are at the same height and register the
tightener bringing the machine in the horizontal posi-
tion.
•
Block the lifting bars of the tractors, in order to avoid the
machine oscillating laterally, as this compromises the
cross-sectional stability of the complex.
•
Fig. 4.1
Summary of Contents for Unica Super
