www.matermacc.it
Use and maintenance handbook
Page 04
1.2.
INFORMATION ON MACHINE
The machine can operate only by means of tractor supplied
with a lifting group and a universal three-points connection.
Besides operating in all the most common inter-rows, perso-
nalized work configurations are available upon request.
The amounts to distribute are regulated through a gear that
derives its motion from the movement of the wheel by trac-
tion.
This agricultural equipment can operate through a cardan
shaft or hydraulic power take-off (optional) applied to the
power take-off of an agricultural tractor.
The machine has been planned and built in order to operate
in open air, so the performances are not conditioned by at-
mospheric agents.
ATTENTION
Every use of the machine different from that indicated
above is to be considered non-authorized and dange-
rous
.
.
1.1. IDENTIFICATION DATA
Every single machine is equipped with an identification plate
(Fig. 1.2), containing the following data:
Fig.1.2
A)
Name, company name and address of the manufacturer.
B)
Machine type
C)
Machine model
D)
Machine serial number
E)
Serial number
F)
Year: Year of manufacture of the machine
G)
Unloaded weight: weight of the machine unloaded and
fully kitted out.
H)
Payload: weight of the machine fully kitted out and with
the tank full.
I)
Permitted loaded weight: total weight of the machine with
the tank full.
L)
Maximum pressure: maximum pressure of the spray sys-
tem, expressed in bars.
M)
Nominal capacity of the tank: expressed in litres.
Summary of Contents for Unica Super
