Flex 2JB-VRX Instruction Manual
June 2022 v1.0
Page 40 of 70
4.2.6.6 Function Relay-1 Programming
Please refe to section 4.2.5 for various types of function relay outputs available.
1) Press the ENTER button to enter function relay-1 setting (cursor shown next to
NORMAL or other setting previously programmed).
2) Press the UP/DOWN buttons to scroll and select.
3) Press the BACK button to go back to Function Relay-1 Programming (cursor shown
next to FUNC RLY1).
4) Press the UP/DOWN buttons to scroll through other system settings.
4.2.6.7 Function Relay-2 Programming
Please refe to section 4.2.5 for various types of function relay outputs available.
1) Press the ENTER button to enter function relay-2 setting (cursor shown next to ---
or other setting previously programmed).
2) Press the UP/DOWN buttons to scroll and select.
3) Press the BACK button to go back to Function Relay-2 Programming (cursor shown
next to FUNC RLY2).
4) Press the UP/DOWN buttons to scroll through other system settings.
4.2.6.8 Function Relay-3 Programming
Please refe to section 4.2.5 for various types of function relay outputs available.
1) Press the ENTER button to enter function relay-3 setting (cursor shown next to
EXT or other setting previously programmed).
2) Press the UP/DOWN buttons to scroll and select.
3) Press the BACK button to go back to Function Relay-3 Programming (cursor shown
next to FUNC RLY3).
4) Press the UP/DOWN buttons to scroll through other system settings.
>FUNC RLY1
NORMAL
UP DOWN ENTER BACK
>FUNC RLY2
---
UP DOWN ENTER BACK
>FUNC RLY3
EXT
UP DOWN ENTER BACK