Flex 2JB-VRX Instruction Manual
June 2022 v1.0
Page 65 of 70
6.9 Battery Charging
The transmitter is designed to accept any off-the-shelf Ni-MH rechargeable batteries.
When charging both transmitter and individual batteries at the same time the priority
always goes to the transmitter charging. The individual battery charging begins only after
the transmitter charging is completed. Depending on the battery capacity the average
charging time is approximately 2 hours from completely drained to fully charged. Constant
red on transmitter battery charging LED (when charging the transmitter) and charging
station LED (when charging individual batteries) represents charging in progress, constant
green represents batteries fully charged, and LED off represents no batteries detected.
Please do not use any rechargeable lithium ion batteries as it will damage both the
transmitter and the charging station.
Wireless Charging
Plugin Charging