Version 2.
peration:
ON/OFF Function:
Press the ‘ON’ button on remote control, the lights will gradually illuminate.
Press the ‘OFF’ button on remote control, the light will gradually turn OFF.
All off' Function:
Press the ‘All off’ button on remote control, all lights will gradually turn off.
Dimming Function:
1.
Make sure the load is switched ON.
2.
On the remote control press the ON button again, the loads will start to dim.
3.
To stop at the desired brightness level, press the ON button again.
※
Dimming level dims in cycle, during the cycle if no signal is given, after 4 cycles it will stop at
100% brightness.
！
After setting a dim level using the remote control the light is then switched OFF, the next time that
the light is switched back ON again the load will return to the previous stipulated brightness.
attery Replacement:
3V CR2032 lithium battery is included.
When the battery voltage is low, the transmission range will be reduced accordingly.
Slide down battery cover and with a screw driver push out the battery.
O
B
