9
Issue Date: 22/1/2020
5. Delay Off Timer Setup
You may choose the mini module to operate normally as an ON/OFF receiver or
have the extra benefit to set up delay off timer.
Factory pre-
setting will be at ‘0’ hour position as normal ON/OFF receiver.
Set up delay off timer:
⚫
There are 4 timer selections, 1 min
– 10 mins – 1 hour – 4 hours
⚫
Adjust rotary switch clockwise to the hours that you wish to setup.
⚫
LED on module will blink once to confirm the mini wall module is properly
setup in each time slot.
⚫
Timer will only remember the first activate timer.
⚫
If during timer count down you adjust the time slot, mini wall module will
ignore the new timer until the current timer ends or you manually turn OFF.
So next time you switch on the module the new timer will be activated.
DELAY OFF TIMER SETUP
