background image

Parts supplied:

1x

1

2

B

1 - 2

4x

to drainage

Natural Stone Baths

Waste connection is dependant on the site situation; final 
decision about installation of waste connection should be 
taken by a suitably qualified person.

When fitting the waste, ensure the 
slotted side faces the overflow channel.

Slot

Overflow 
channel

Under floor access required for plumbing of bath waste.

I

mportant

• Please unwrap the bath and check it carefully to ensure it has not been damaged in handling or transport.

• Please check that all parts have been supplied.

• Assemble bath on a mat to protect against damage to bath surface. 

• Please do not remove the old fixture before you unpack and inspect the new unit.

• Store the bath in a safe place until you begin installation to avoid damage.

• Any installation should be carried out by a qualified tradesman with knowledge of statutory plumbing requirements in your area.

• This product requires a two person lift – use proper lifting techniques.

• This installation guide does not include details of waste connection; final decision about installation of waste connection should be taken by a suitably qualified person.
            Do NOT overtighten the waste as this may cause long term damage to the bath. We recommend to use a torque wrench to tighten the waste by using a 
             torque force between 25 Nm and 50Nm.

Care and Maintenance

Repairing a scratch: If any scratches occur during installation these can be removed by rubbing with a 800 grit waterproof abrasive paper and water.

For best results limit sanding to the smallest possible area around the scratch.

It may be possible to polish very fine scratches away without using abrasive papers: scrubbing gently with a soft brush or plastic pad 

(not metal scouring pad) and a mildly abrasive cream cleaner. Afterwards scrub the whole area with plenty of clean water.

Everyday cleaning

We recommend a non-abrasive bathroom cleaner. 

Warning

Never use cleaners / bleach products specifically manufactured for WC bowl cleaning as they may damage your bath. In addition to these we strongly 

recommend that applying hair colouring is also not used over the bath as it may de-colour the natural stone. 

3

Manufacturers

Identification Number

In the event of after

sales requirements

please quote this

number.

Please place your bath
identification number 
here and keep this 
paperwork in a safe 
place as you will 
need this if a problem 
occurs with your product. 

XXXXXXXXXXX

1x

Reviews: