background image

18

19

Flips and rolls

You can perform flips and rolls with your Drone in any of the speed 

settings. In order to safely perform these manoeuvres, ensure the 

Drone maintains a clearance of minimum 1 metre above and below  

the Drone, and from any obstacles.

To roll to the left:

 Press down the Right throttle (19) so that it clicks 

and then push it to the left.

ON

OFF

OFF

ON

To roll to the right:

 Press down the Right throttle (19) so that it clicks 

and then push it to the right.

ON

OFF

OFF

ON

Speed settings

The Pico Cam 2.0 has 3 different flight speeds to choose from; low, 

medium and high. To select your desired speed, press down the  

Left throttle (11) so that it clicks. The controller will then indicate  

which speed mode you have selected in the following ways:

Low speed:

    

 the controller will beep once, and the  

Power LED indicator (14) will flash once.

Medium speed:

  

  the controller will beep twice, and the  

 Power LED indicator (14) will flash twice.

High speed:

  

  the controller will beep three times, and the  

Power LED indicator (14) will flash three times.

[continued

]

Summary of Contents for Pico CAM 2.0



















Reviews: