arcelik 09565, User Manual

Sleep Function 

3. 

4. 

5JNFS

 On/Off function

5JNFS0O

 (

Aç

)

Open

Off

Cancel

Exit

Controller display

Controller display

Set the clock using the "        " 

buttons. (Each time you press the button it 

will change in units of 10 min.) If the button 

is pressed and held down for 3 seconds, 

the 10 minute transitions will be run faster.)

Press the "

Onay

" button (     ) to finish 

setting the clock When the setting is 

complete, the "

Aç

" symbol will appear on 

the remote control and the current time will 

be displayed.

Controller display

23

This function prevents your room from 

cooling down or warming up extremely 

during sleep. When the sleep setting 

function is selected while the air conditioner 

is in cooling or heating mode, the unit 

provides optimal comfort and stops after 

the set time.

Allows the air conditioner to turn on or off 

automatically when you are away from 

home or asleep.

To turn on the air conditioner automatically, 

you can set the program by performing the 

following operations.

Example: Let the air conditioner switch on 

at 10:00 in the morning.

Press the "

Zamanlayıcı

" button (    ) until the 

"Network" symbol   starts to flash.

Timer

 On, 

Timer

 Off, Cancel 

and exit from these 

functions

 are available as a

 combination under the timer button. 

Sequencing is as shown in the table.

To operate the product, press the "    " 

button.

Select the desired mode by pressing 

one of the "Cool" (    ), "Heat" (    ) or 

"Mode" (     ) buttons.

Set the A/C to a desired temperature. 

See “Temperature adjustment"

Press the "Sleep" button (    ) to start the 

sleep mode function.

Each time the "Sleep" (    ) button is 

pressed, the operating time of the 

selected mode will be added by 1 hour.

- You can set the sleep mode between 

1-7 hours.

- If 7 hours are exceeded, the system 

will automatically exit "Sleep" mode.

Please select the appropriate duration 

for sleep mode. (Cooling your room for 

long periods is not good for your health.)

While in sleep mode function, after 30 

minutes, the room temperature set value 

will be 1° C higher than the temperature 

you have set in Cooling mode, and 2° C 

higher after 1 hour.

While in sleep mode, after 60 minutes, 

the room temperature set value will be 

1° C lower than the temperature you 

have set in Heating mode, and 2° C 

lower after 2 hours.

Sleep mode can only be set while the 

product is operating.