1. Press the "
Zamanlayıcı
" button ( )
until the
4.
5.
5.
5JNFS
-
0
ff
Kapat
On
Off
Cancel
Exit
Controller display
Controller display
Controller display
Controller display
A/C indicator
A/C indicator
24
4.
To
cancel the timer on function
press the "
zamanlayıcı
" button (
)
until "
İptal
" appears, then press the
"
Onay
" button (
) after exiting the
"
İptal
" option.
Repeat steps 1,2,3 to change the auto
power on time again.
When the
Timer
-On Function is
set, pressing any key except the Up
and Down arrow keys or the confirma
tion
keys exits the
Timer
-On Function.
Clock format is 24-hour clock. It is very
important to set the time correctly as
the program setting you will adjust the
air conditioner with will be based on the
clock of the remote control.
The
Timer
-On Function is
operable when the controller is off.
To turn off the air conditioner automatical-
ly, you can set the program by performing
the following operations.
Example: Let the air conditioner switch off
at 10:00 in the morning.
"
Kapat
" symbol starts to flash.
Timer
On,
Timer
Off, Cancel
functions
and exit from these
are available as a
combination under the timer button.
Sequencing is as shown in the table.
Set the clock using the buttons.
(Each time you press the button it will
change in units of 10 min.) If the button
is pressed and held down for 3
seconds, the 10 minute transitions will
be run faster.)
Press the "
Onay
"
( )
button to finish
setting the clock. When the setting is
complete, the "
Kapat
" symbol will appear
on the remote control and the current
time will be displayed.
To cancel the
timer off
function,
press the "
Zamanlayıcı
" button ( )
until "
İptal
" appears, then press the
"
Onay
" button ( ) after exiting the
"
İptal
" option.
Repeat steps 1,2,3 to change the auto
power on time again. When the
Timer
-Off
Function is set pressing any key
except
the Up and
Down arrow keys or the confirmation
keys exits the
Timer
-Off Function.
Clock format is 24-hour clock.
It is very important to set the time
correctly as the program setting you
will adjust the air conditioner with will
be based on the clock of the remote
control.
The
Timer
Off Function is
operable when the controller is off.
