As the control temperature
sensor detects temperatures
in a wide range, the ambient
temperature displayed on the
controller can be misleading.
Wireless remote controller
Rapid Cooling/Heating Function:
Increases/Decreases
the indoor temperature in a short time.
Control
Panel
Display
Screen
Description
%
Soft Air:
Directs the direct incoming air flow up or down.
Energy Control Cooling Function:
Activates the energy-
saving mode. This mode consists of three steps.
Silent function:
Decreases the outdoor unit volume.
Indoor Fan Speed
It adjusts the fan speed.
Temperature Adjustment:
Regulates the room
temperature during cooling and heating.Fahrenheit
Celcius Switch:
Pressing the "Sleep" and "Timer" buttons
at the same time for 10 seconds will enable the switch.
On/Off:
Switches On/Off the A/C.
Cooling Mode:
Cools the environment.
Auto-operation Mode:
Heats or cools according to the
set temperature.
Dehumidifying mode:
Removes the humidity in the
environment.
Fan Mode:
Provides air circulation in the environment.
Heating Mode:
Heats the environment.
Air flow direction:
Sets the air flow direction vertically.
Air flow direction:
Sets the air flow direction horizontally.
Ionizer:
It removes microscopic particles by ionizing the
environment. Removes bad odours.
Cleaning:
Removes moisture that occurs in the indoor unit.
Sleep Function:
Prevents your room from cooling
down or warming up extremely during sleep.
Turns on the air conditioner at the set time.
Turns off the air conditioner at the set time.
Cancels all time settings.
Enters the clock setting section of the controller when the
"Timer" button ( ) is pressed and held for 3 seconds.
Ambient Temperature is displayed on the controller display when
the "Confirm" button is pressed and held for 3 seconds.
Switches the display on the air conditioner on/off when the
"Sleep" button ( ) is pressed and held for 3 seconds.
Confirms the settings for the timer and clock.
Control
Panel
LCD
Display
Signal Transmitter
Adjustment:
Timer On:
Timer Off:
Timer Cancel: