Important instructions for safety and environment
5 /35EN
Refrigerator/ User manual
t
Do not block or cover vent
i
lat
i
on
holes. Otherw
i
se, power
consumpt
i
on may be
i
ncreased
and damage to your product may
occur.
t
Do not connect the product to
supply systems such as solar
power suppl
i
es. Otherw
i
se,
damage to your product may occur
as a result of the abrupt voltage
fluctuat
i
ons!
t
The more refr
i
gerant a refr
i
gerator
conta
i
ns, the b
i
gger
i
ts
i
nstallat
i
on
room shall be. In very small rooms,
a flammable gas-a
i
r m
i
xture may
occur
i
n case of a gas leak
i
n the
cool
i
ng system. At least 1 m
3
of
volume
i
s requ
i
red for each 8
grams of refr
i
gerant. The amount
of the refr
i
gerant ava
i
lable
i
n your
product
i
s spec
i
f
i
ed
i
n the Type
Label.
t
The
i
nstallat
i
on place of the
product shall not be exposed to
d
i
rect sunl
i
ght and
i
t shall not be
i
n
the v
i
c
i
n
i
ty of a heat source such
as stoves, rad
i
ators, etc.
If you cannot prevent installation of the product
in the vicinity of a heat source, you shall use a
suitable insulation plate and the minimum dis-
tance to the heat source shall be as specified
below.
- At least 30 cm away from heat sources
such as stoves, heating units and heaters, etc.,
- And at least 5 cm away from electric
ovens.
t
Your product has the protect
i
on
class of I. Plug the product
i
n a
grounded socket that conforms
w
i
th the Voltage, Current and
Frequency values spec
i
f
i
ed
i
n the
type label. The socket outlet shall be
equ
i
pped w
i
th a fuse w
i
th a rat
i
ng
of 10 A – 16 A. Our company shall
not be respons
i
ble for the damages
that shall be
i
ncurred as a result
of operat
i
ng the product w
i
thout
ensur
i
ng ground and electr
i
cal
connect
i
ons made as per local or
nat
i
onal regulat
i
ons.
t
The product’s power cable must
be unplugged dur
i
ng
i
nstallat
i
on.
Otherw
i
se, r
i
sk of electr
i
c shock and
i
njury may occur!
t
Do not plug the product to loose, broken, dirty,
greasy sockets or sockets that has come out
their seats or sockets with a risk of water
contact.
t
Place the power cord and hoses (if available)
of the product so that they shall not cause a
risk of tripping over.
t
Penetration of humidity to live parts or to the
power cord may cause short circuit. Thus, do
not use the product in humid environments or
in areas where water may splash (e.g. garage,
laundry room, etc.) If the refrigerator is wet
by water, unplug it and contact an authorized
service.
t
Do not connect your refrigerator to power
saving devices. These systems are harmful for
the product.
1.6
Operational safety
t
Do not use chemical solvents on the product.
These materials contain an explosion risk.
t
In case of a failure of the product, unplug it
and do not operate until it is repaired by the
authorized service. There is a risk of electric
shock!
