14 / 29 EN
Refrigerator / User Guide
Using the product
1. Fault Condition Indicator
This indicator (
) shall be active when your
refrigerator cannot perform adequate cooling or in
case of any sensor error. “E” shall be displayed on
the Freezing Compartment temperature indicator
and figures such as 1,2,3... shall be displayed on
the cooling compartment temperature indicator.
These figures provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep
the door open for a long period of time. This is not
a fault, this warning shall be removed when the
food is cooled down or when any key is pressed.
2. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically
and the energy saving symbol () is displayed
when the door of the product is not opened or
closed for some period of time. When the energy
saving function is active, all symbols on the screen
other than the energy saving symbol shall be
turned off. When the energy-saving function is
active, pressing any key or opening the door will
deactivate the energy-saving function and the
display signals will return to normal. The energy-
saving function is an active function at the factory
defaults and cannot be cancelled.
3. Wireless Key
When the key is pressed for a long period (3
seconds), the wireless connection symbol on the
display/screen flashes slowly (with intervals of 0.5
seconds). The home network is initialized on the
product this way.
After achieving wireless connection with the
product, wireless connection symbol (
)
illuminates continuously.
When the initial connection is established, you may
activate/deactivate the connection with a short
press on this key. The wireless connection symbol
shall flash quickly (at 0.2 second intervals) until the
connection is established. When the connection is
active, the wireless network symbol shall light up
continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to
the “Troubleshooting” section provided in the user
manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
You may access the application by reading the
QR code available on the HomeWhiz label on the
product. Application is offered through App Store
for IOS devices, and through Play Store for Android
devices.
Visit https://www.homewhiz.com/ for detailed
information.’
4. Freezing Compartment Temperature
Setting Key
Temperature setting is made for cooler compartment.
Pressing this key will enable the freezer compartment
temperature to be set at -15,-16,-18,-19,-20,-22,-
24 Celcius.
5. Cooling Compartment Temperature Setting
Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable the
cooling compartment temperature to be set at
8,7,6,5,4,3,2 and 1 Celcius.
6. Support Service Key
Press this key for
3 seconds
to activate/deactivate
the support service. Detailed information on the
support service is provided in the “Support Service
Feature” section.
7. Quick Freezing Key
When the quick freeze key is pressed, the quick
freeze symbol (
) shall be illuminated and the
quick freeze function shall be activated. Freezing
compartment temperature is set to -27 Celcius.
Press the key again to cancel function. The quick
freezing function shall be automatically cancelled
after 52 hours. To freeze a large amount of fresh
food, press the quick freeze key before placing the
food in the freezer compartment.
