background image

 

36’’ 3 DOORS WARDROBE TYPE REFRIGERATOR

 

/ REV 

NO: 00

 

 

 

52 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
10.7.Noise from the evaporator fan motor 

 

The refrigerator 

operates 

tumultuously 

The operation sound 

changes when the 

refrigerator is running. 

Shake or 

noise sound is 

heard. 

There is a ticking 

noise from the 

refrigerator. 

The operation performance 

characteristics of the 
refrigerator may vary 

depending on the changes 

in the ambient temperature. 

This noise comes from the 

solenoid valve of the 

refrigerator. Solenoid valve 

functions for the purpose of 

coolant passage through a 

compartment called 

MULTIZONE/COOL SELECT 

compartment which can be 

adjusted to different 

temperatures, and performing 

cooling functions. 

Ground stabilization adjustment 
may not be appropriate or there 

are some items on the 

refrigerator. 

Adjust the refrigerator 

in accordance with the 

ground where it is 

placed and remove the 

items on the top if any. 

This is normal and 

is not fault cause. 

Summary of Contents for BEKO G91629NWU









































































































Reviews: