14
You can balance your refrigerator by turning the front legs of it as illustrated in the figure. The
corner where the leg exists is lowered when you turn in the direction of black arrow and raised when
you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will
facilitate this process.
4
DOOR GROUPS ASSEMBLY/DISASSEMBLY
INSTRUCTIONS
4.1
Assembly / Disassembly Works for Upper Door Hinge Cover
Hinge cover is mounted on the hinge body by means of a screw. In order to remove it, it is
required to unscrew it with Philips screwdriver, and take the cover by slightly lifting from the
bottom.
4.2
Removing the Upper Door
To remove the upper door, first the cable connection socket used for the display passing via
hand plates over the door should be removed (applicable for models with display). Following this
procedure, hinge screws located in the middle section in the lower part of the door will be
unscrewed with Torx pointed screwdrivers. The door which is completely disconnected should be
taken out by using the hand plate space over the door.
