19
Lower and upper door are removed by dismounting the middle hinge (See 4.2). Screws
holding the upper hinge are removed by using a Torx pointed screwdriver (See 8.1). Then, hinge
that is found in the left kit group of door is screwed to the other side. In the same manner, the lower
hinge is removed (See 8.3) and screwed to the other side.
By changing the direction of display cable (models with display), it is passed from the hinge
door on the hand plate on the body, and screws holding the hand plate on the body are tightened
with Philips screwdriver.
The door is mounted onto the hinge and lifted upwards. The door is reassembled by
repeating the procedure in 4.2 in reverse order.
Finally, cable sockets found on the door and body are connected (models with display), and
by mounting the hinge covers assembly procedure is finalized.
