24
To attach them, first the upper and side tabs are snapped to the drawer body, and then they can be
mounted to the drawer body by snapping the tabs located at the bottom.
5.8
Removing Fridge Compartment Crisper Rails
Crisper rails located in the fridge compartment are attached by two screws and tabs passing
to the interior body. Screws located in the front and rear sections are loosened with Phillips
screwdriver, and afterwards rails are slid above, and removed by retracting.
6
ASSEMBLY / DISASSEMBLY WORKS FOR PARTS IN
FREEZER COMPARTMENT
6.1
Assembly/Disassembly Works for Evaporator Cover (No-Frost (GKN)
Models)
In order to assemble the evaporator cover, two screws found in the bottom of the evaporator
cover are loosened with the help of a Phillips screwdriver. Then the tabs of the evaporator cover are
removed from slots in the body, and disassembly can be made by pulling the evaporator cover from
the bottom.