26
6.4
Removing the Thermal Fuse (No-Frost (GKN) Models)
The thermal fuse is snapped on the pipe on the evaporator assembly by means of a tab
structure. The part can be removed by holding as shown in the picture.
6.5
Removing the Sensor (No-Frost (GKN) Models)
The grey-colored Sensor is contained in the evaporator group. It is connected on the
evaporator pipe by means of a plastic clamp and an Aluminum strap. To remove it, the plastic clamp
is cut by using a side cutter. The Al strap which fixes the Sensor on the Al pipe will be cut to
remove the socket connection and complete the disassembly process.
6.6
Removing the Freezer Drain Heater (No-Frost (GKN) Models)
The heater part is adhered on the drain section. The cable connection is fitted on the
evaporator pipe by means of a plastic clamp and the socket connection is made in the socket box.
