MANUAL V3.0
5, 5g & 7
MAIN SETTINGS > P. 54
“LCD Backlight”
adjusts the level of backlight of the built-in screen.
5/5g
“Brightness”/“Contrast”
use these sliders to adjust the display parameters of the built-in screen (contrast,
and brightness).
you can also reset the display parameters to their default values (“
Reset
” button).
“Touch-Screen Calibration”
If the touchscreen is not responding properly, use this button and follow the in-
structions on the screen.
If this does not work or if you cannot access the touchscreen settings, you
can force the touchscreen calibration (see:
System Recovery
).
8.3 “TV OuT” seTTIngs
“TV OuT” seTTIngs
These settings only appear when the ARCHOS is connected to the DVR
Station, Mini Dock or Battery Dock.
“TV Connection”
when your ARCHOS is connected to the optional DVR Station (available at
www.archos.com or from the Media Club), select the type of video output
(“
Composite
”, “
S-Video
”, “
RGB
”, “
Component
” or “
HDMI
”), based on how you
have connected the DVR Station to your TV.
“Resolution” *
select the resolution that best adapts to your TV: “
VGA 4/3 (640x480 60Hz)
”,
“
480p 16/9 (720x480 60Hz)
”, “
576p 16/9 (720x576 50Hz)
” or “
720p 16/9
(1280x720 50Hz)
”.
* This parameter only appears if you choose the “HDMI” TV connection mode.
-
-
-
-
-
-