14
M1*
The speaker is on until the modem detects the carrier signal.
M2
The speaker is always on when modem is off-hook.
M3
The speaker is on until the carrier is detected, except while dialing.
Result Codes:
OK
n = 0, 1, 2, 3
ERROR
Otherwise
Nn Modulation Selection
This command controls whether or not the local modem performs a negotiated
handshake at connection time with the remote modem when the
communication speed of the two
modems is different.
N0
When originating or answering, this is for handshake only at the
communication standard specified by AT*Nn.
N1*
During handshake, Highest speed is specified by AT*Nn.
Depend on line quality fallback to a lower speed may occur.
Result Codes:
OK
n = 0, 1
ERROR
Otherwise
On Return Online to Data Mode
O0*
Exit online command mode and return to data mode (see AT Escape
Sequence, +++AT).
O1
This command issues a retrain before returning to online data mode.
O2
This command issues a rate re-negotiation before returning to online data
mode.
Result Codes:
OK
n = 0, 1, 3
ERROR
Otherwise
P Select Pulse Dialing
This command configures the modem for pulse (non-touch-tone) dialing.
Summary of Contents for 5634PCV
Page 1: ...1 5634 PCV User s Manual ...