18
3-DRAWINGS AND TECHNICAL FEATURES
TECHNICAL CHARACTERISTICS
ASKO PC10 COMFORT AIR
Nominal output power
10.1 kW (8686 kcal/h)
Minimum power output
2.9 kW (2494 kcal/h)
Efficiency at Max
90.3%
Efficiency at Min
92.9%
Temperature of exhaust smoke at Max
180 °C
Temperature of exhaust smoke at Min
85 °C
Particulate /OGC / Nox (13%O
2
)
17 mg/Nm3 - 5 mg/Nm3 - 98 mg/Nm3
CO at 13% O
2
at Min and at Max
0.050 – 0.017%
CO
2
at Min and at Max
4.9% - 8.8%
Recommended draught at Max*** power
0.10 mbar - 10 Pa***
Minimum draft allowed at minimum power
0.02 mbar - 2 Pa
Smoke mass
8 g/sec
Hopper capacity
42 litres
Type of pellet fuel
Pellet diameter 6-8 mm and size 3 ÷ 40 mm
Pellet hourly consumption
Min ~ 0.7 kg/h* - Max ~ 2.2 kg/h*
Autonomy
At min ~ 39 h* - At max ~ 12 h*
Heatable volume m
3
217/40 – 248/35 – 290/30 **
Combustion air inlet
Ø 50 mm
Smoke outlet
Ø 80 mm
Air intlet
80 cm
2
Rated electrical power (EN 60335-1)
130 W (Max 370 W)
Supply voltage and frequency
230 Volt / 50 Hz
Net weight
240 kg (with cladding)
Weight with packaging
260 kg (with cladding)
Distance from combustible material (back/side/under)
120mm/200mm/0 mm
Distance from combustible material (ceiling/front)
800mm/1000 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 40-35-30 Kcal/h per m
3
)
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011).
