DIGITAL TIME SWITCH
● Can set 20 groups on-off program, cycle weekly or daily, and control on-off manually
● Can set 20 groups pulsation program, cycle weekly or daily, and control on-off manually
● With countdown function, time range setting within 1 s ~ 99min 59sec
● Can set Daylight Saving Time (1Hours) manually
● Built-in lithium battery, and travel time as usual if power failure
● Can check accumulated operating time and action number
● Automatic time correction(-3 sec ≤
△
t≤3 sec) every day
● DIN35mm standard rails suitable for construction and industrial installation
Technical data
Rated voltage
：
220VAC 50Hz
Power failure memory:
3year
Voltage range:
85~110%
Contact Form:
1 group conversion
Number of on/off setting:
20 groups on/off program
consumed power
：
≤ 5VA
Number of pulsation setting:
20
Electrical life
：
10
5
times
Contact load capacity:
Resistance load: 16A/ 250V AC COS φ=1
Inductive load: 10A/ 250V AC COS φ=0.6
Mechanical life
：
10
7
times
Countdown time
：
1 sec- 99min59sec
Work temperature
：
-10 ~ +50
O
C (non-icing
）
Contact resistance between contacts:
≤100mΩ
Ambient humidity
：
35
～
85
﹪
RH
Insulation resistance between contacts
：
≥100MΩ
Storage temperature
：
-10 ~ +60
O
C
Timing error
：
≤±2 sec/day(25
℃
)
Weight
：
About150g
Minimum setting time:
ON/OFF program: minimum 1 min;
Pulse program: minimum 1 sec
Wiring drawing and external dimension
Setting method
* If there is no display for the first time, press “RESET”.(press both “D+” and “H+” for 3 seconds, then the product will be turned off and all setting will
be lost. But day correction parameters, accumulated operating times and action times are reserved.)
1. Setting display time(present time)
：
Step
Button
programming
1
Hold
and then press
H+
HOUR increases on the screen, press
H+
continuously, the hours increase
2
Hold
and then press
M+
MINUTE increases on the screen, continuously press
M+
, the minutes increase
3
Hold
and then press
D+
Mark of WEEK moves on the screen, press
M+
continuously to choose the week
* The timer is 24 hour system when turned on, hold
“ ”
for 5 sec to convert to 12 hours system with “AM” showed on the upper left corner. Hold
“ ”
for 5 sec again to convert to 24 hours system and the “AM” on the upper left corner will be disappeared.
A L I O N
A H C 1 5 A
