IMPORTANT SAFETY
INFORMATION
This is a
SAFETY ALERT
symbol.
It is used to alert you to
potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible injury or death.
DANGER
indicates a
hazardous situation which, if not avoided,
will result in death or injury.
WARNING
indicates a
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
indicates a
hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE
indicates
important information which, if not followed,
may cause damage to equipment.
SAVE THIS MANUAL
Keep this manual for the warnings and pre-
cautions, the operating instructions and the
maintenance tips that are included in it.
Write the product’s model number and pur-
chase date on the cover page of this man-
ual. Keep your purchase receipt in a safe
location.
UNPACKING
The
shi
pment should be thoroughly inspected as
soon as it is received. The signed “bill of lad-
ing” is acknowledgement by the carrier of receipt
in good condition or shipment covered by our
invoice. For your own protection, if any of the
goods called for on the bill of lading are shorted
or damaged, do not accept them until the carrier
makes a notation on the freight bill of the shorted
or damaged goods.
Notify ArcPro immediately if any hidden loss
or damage is discovered after receipt.
DANGER
WARNING
CAUTION
NOTICE
INSTRUCTION
MANUAL
WARNING concerning Risk of Eye
Injury. Wear ANSI approved impact
safety goggles with side shields,
under the Welding Helmet.
WARNING concerning Risk of
Hearing Loss. Wear hearing pro-
tection.
WARNING concerning Risk of
Respiratory Injury. Wear NIOSH
approved dust mask/respirator.
WARNING concerning Risk of Inha-
lation of welding toxic fumes.
Definition of Symbols
IMPORTANT SAFETY
INSTRUCTIONS
Read and understand all
safety warnings and in-
structions.
Failure to follow the warnings
and instructions may result in serious injury
or death. Save all warnings and instructions
for future reference.
2.
Personal and Work Area Safety
A.
Always wear ANSI approved
impact safety goggles with
side shields, under the
Welding
Helmet.
B.
Always wear hearing protec-
tection when working in
noisy environments.
Prolonged exposure
to high intensity noise can cause hearing
loss.
C.
Use safety equipment.
Safe-
ty shoes, welding helmet, work
gloves and dust mask/resperator must be
used for applicable conditions.
Model 20702 Page 2
