Arcserve Appliances 9000 Series Hardware Installation Guide
5
Square
Hole
Rack
Round
Hole
Rack
5. Securing the Rails to the Rack
Step 1:
To secure the rails to the rack for shipping or in unstable
environments, install the supplied screws to the rails.
•
For square hole racks, install the supplied conical
washer to the screw before installing the screw.
•
For unthreaded round hole racks, install only the
screw without the conical washer.
Step 2:
Insert and tighten the two screws using the Phillips #2
screwdriver to secure the rails to the rack.
Intermediate Rail
Inner Rail
White Tab
Step 1
Step 2
6. Installing the Appliance in the Rack
Step 1:
Pull the intermediate rails out of the rack until they
lock into place.
Step 2:
Release the inner rail lock by pulling forward on the white tabs
and sliding the inner rail out of the intermediate rails.
Step 3:
Attach the inner rails to the sides of the system
by aligning the J-slots on the rail with the standoffs
on the system and sliding forward on the system
until they lock into place.
Step 3
J Slot
(continued on the next page)
CAUTION
Use of a mechanical assistant to install and align
the appliance into the rack rails is required.
70lbs+
