Parameter
Description
Active cleared color.
Color displayed for an alarm that has a signal currently active AND it has been acknowledged with
"Reset command". If "Reset command" is given the alarm will return to "Inactive color" when the
activating signal is reset too.
Inactive uncleared
color.
Color displayed for an alarm that had a signal active in the past but hasn't been acknowledged with
"Reset command" yet. After "Reset command" is given the alarm will return to "Inactive color".
Active / Active
cleared / Inactive
uncleared mode
Selection between solid and blinking modes. If blinking mode is selected the color of alarm will
alternate between its color and inacive color.
Blinking frequency
Sets how frequently blinking states switch colors.
Zoom pop-up
When enabled pressing up arrow button will zoom alarm boxes. Zoomed alarm can then be selected
with up, down, left and right arrow buttons. Press back-button to exit zoomed view.
Figure. 5.1 - 7. Alarm color behaviour with active alarm clearing enabled and disabled.
By default active alarms cannot be cleared. This can be changed by setting
Clear active
alarms to Enabled at General
→
Device info menu. When enabled the alarms otherwise change color
just the same way as with default settings but it is also possible to clear an alarm while the activation
signal is still active. If alarm is cleared when signal is active, color will change to what has been set
to
Active cleared color in Carousel designer (orange by default).
A
AQ
Q-S254
-S254
Instruction manual
Version: 2.06
18
© Arcteq Relays Ltd
IM00024
Summary of Contents for AQ-S254
Page 1: ...AQ S254 Alarm and Indication IED Instruction manual...
Page 2: ......
