151
23. Place tab-washer onto the sprocket making sure it
covers the pin in the alignment hole.
ATV-1027
24. Install the first cap screw (threads coated with red
Loctite #271) securing the sprocket and tab-washer
to the camshaft. Tighten only until snug.
GZ195
25. Rotate the crankshaft until the second cap screw
securing the sprocket to the camshaft can be
installed; then install the cap screw (threads coated
with red Loctite #271) and tighten to 11 ft-lb. Bend
the tab to secure the cap screw.
GZ193
CD465
26. Rotate the crankshaft until the first cap screw (from
step 23) can be addressed; then tighten to 11 ft-lb.
Bend the tab to secure the cap screw.
GZ194
27. Place the C-rings into position in their grooves in the
cylinder heads.
CC012D
28. Install the cylinder head plugs in the cylinder heads
with the open end facing downward and toward the
inside.
CAUTION
Care must be taken that the tab-washer is installed cor-
rectly to cover the alignment hole on the sprocket. If the
alignment pin falls out, severe engine damage will
result.
CAUTION
The open end of the plug must be positioned downward.
