background image

71

Limited Warranty

Arctic Cat Inc. (hereinafter referred to as Arctic Cat) extends a limited warranty as described below on
each new Arctic Cat ATV it assembles and on each genuine Arctic Cat ATV part and accessory
assembled and sold by an authorized Arctic Cat ATV dealer. The limited warranty on an Arctic Cat ATV
is extended to the original retail purchaser for the time periods described below; however, the balance
of the remaining warranty may be transferred to another party unless the purchase is for commercial
use (see below). Warranty coverage is only available in the country in which the original retail purchase
occurs to the original retail purchaser resident in that country or to a transferee resident in that country
of the balance of the remaining warranty.

Arctic Cat warrants only the products it assembles and/or sells and does not warrant that other
products will function properly when used with an Arctic Cat ATV or will not damage the ATV. Arctic Cat
does not assume any liability for incidental or consequential damages.

Arctic Cat will repair or replace, at its option, free of charge (including any related labor charges), any
parts that are found to be warrantable in material or workmanship. This repair work MUST be done by
an authorized Arctic Cat ATV dealer. No transportation charges, rental charges, or inconvenience costs
will be paid by Arctic Cat. The warranty is validated upon examination of said parts by Arctic Cat or an
authorized Arctic Cat ATV dealer. Arctic Cat reserves the right to inspect such parts at its factory for
final determination if warranty should apply.

The warranty periods are as follows:

1. Six months from the date of sale — for an Arctic Cat ATV used for recreational purposes.

2. Ninety days from date of invoice — for an Arctic Cat ATV used for commercial purposes, including

rental operations (non-transferable).

3. Thirty days from date of sale of ATV on Arctic Cat supplied batteries.

Exclusions to this warranty include normal wear, abuse, or corrosion and the following parts and

items:

Tires

CV Boots

Torn or Punctured Upholstery

Oil Filter

Drive Belt

Cracks or Gouges in Body Panels

Air Filter

Brake Pads

Drive/Driven Clutch Wear Parts

Light Bulbs

Spark Plug(s)

The following will VOID Arctic Cat’s warranty:

1. Failure to perform the proper break-in procedure and all related maintenance, storage procedures

(if stored for extended periods), and/or service as recommended in the Operator’s Manual.

2. Repairs and/or adjustments by anyone other than an authorized Arctic Cat ATV dealer.

3. Use of improper carburetor jets.

4. Use of improper gasoline, lubricating oils, or spark plug(s).

5. An accident or subjecting the ATV to misuse, abuse, or negligent operation.

6. Any modification, addition, or removal of parts unless instructed to do so by Arctic Cat.

7. Use of the ATV in any way for racing purposes.

8. Removal of the engine for use in another vehicle.

9. Removal or mutilation of the Vehicle Identification Number or Engine Serial Number.

10. Use of parts not sold or approved by Arctic Cat.

11. Damage due to improper transportation.

Arctic Cat shall not be responsible for and this limited warranty excludes recovery of economic,
punitive, consequential and incidental damages, lost profits, and loss of use. Some states or
provinces do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation may not apply to you. Arctic Cat’s aggregate liability may not exceed the
price of the product. The law of the State of Minnesota shall apply to all claims or disputes,
exclusive of its conflicts of law provisions.

IMPLIED WARRANTY EXCLUSION AND DISCLAIMER

To the fullest extent permitted by law, Arctic Cat excludes and disclaims all implied warranties
of merchantability and fitness for a particular purpose.
If you are not satisfied with warranty service or repairs, you should contact Arctic Cat at (U.S.)
1-218-681-9851 or (Canada) 1-204-982-1656.

Summary of Contents for 300 Utility





















































































Reviews: