background image

!

CAUTION

When the air filter is to be
removed, do not touch the
metal parts of the unit.

It may cause an injury.

Do not clean unit when
power is on as it may cause
fire and electric shock, it may
cause an injury.

Operation with windows
opened may cause wetting
of indoor and soaking of
household furniture.

When the unit is to be
cleaned, switch off, and turn
off the circuit breaker.

Stop operation and close
the window in storm or
hurricane.

Use caution when unpacking and
installing. Sharp edges could cause injury.

Do not clean the air
conditioner with water.

Water may enter the unit and
degrade the insulation. It may
cause an electric shock.

This could injure the pet or
plant.

It may cause electric shock
and damage.

Do not put a pet or house
plant where it will be
exposed to direct air flow.

Hold the plug by the head
of the power plug when
taking it out.

Ventilate the room well when
used together with a stove,
etc.

An oxygen shortage may occur.

Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects.

It may cause deterioration of

quality, etc.

It may cause failure of product

or fire.

Do not use for special
purposes.

Turn off the main power
switch when not sing the
unit for a long time.

u

If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate
supply by taking the power-plug out and contact a
qualified service technician.

3

!

!

!

!

!

!

!

It may cause failure of
appliance or accident.

Appearance may be
deteriorated due to change
of product color or
scratching of its surface.

Do not place obstacles
around air-inlets or inside
of air-outlet.

Do not use strong deter-
gent such as wax or
thinner but use a soft cloth.

If bracket is damaged, there
is concern of damage due to
falling of unit.

There is danger of fire or
electric shock.

Ensure that the installation bracket of
the outdoor appliance is not damaged
due to prolonged exposure.

Do not place heavy object on the
power cord and ensure that the cord
is not compressed.

Operation without filters may

cause failure.

It contains contaminants and

could make you sick.

Always insert the filters
securely. Clean filter once
every two weeks.

Do not drink water drained
from air conditioner.

!

!

Meijer.com

Summary of Contents for KSTAT12-1A





























Reviews: