Arctic APL81222XLAB, User Manual

44 / EN

Washing Machine / User’s Manual

4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds

• Drum Cleaning 

Press and hold the auxiliary function button 1 for 3 seconds to select the programme.

Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. 

Operate the programme while the machine is completely empty. To obtain better results, put 

powder lime-scale remover for washing machines into the detergent compartment no. “2”. When the 

programme is over, leave the loading door ajar so that the inside of the machine gets dry.

C

This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that 

there is load inside and aborts the programme.

• Child lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid 

any changes in a running programme.

C

If the Programme Selection knob is turned when the Child Lock is active, "Con" appears on the display. The Child 

Lock does not allow any change in the programmes and the selected temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is active, 

previously selected programme will continue running.

To activate the Child Lock:

2. Pres and hold the Auxiliary Function button for 3 seconds. C03, C02, C01 will appear on the display 

respectively while you keep the button pressed for 3 seconds. Then, while the light of the Auxiliary 

Function button 2 is flashing, "Con" will appear on the display indicating that the child lock has been 

activated. If you press any button or turn the Programme Selection knob when the Child Lock is 

active, same phrase will appear on the display.

To deactivate the Child Lock:

Press and hold the Auxiliary Function button 2 for 3 seconds while a programme is running. C03, 

C02, C01 will appear on the display respectively while you keep the button pressed for 3 seconds. 

Then, while the light of the auxiliary function button 2 is flashing, "COF" will appear on the display 

indicating that the child lock has been deactivated.

C

In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On / Off 

position when no programme is running, and select another programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.

4.3.11 Delayed Start

With the Delayed Start function the startup of the programme may be delayed up to 19 hours. 

Delayed start time can be increased by increments of 1 hour.

C

Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.

1.  Open the loading door, place the laundry and put detergent, etc.

2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3.  Set the desired time by pressing the Delayed Start button.

4.  Press Start / Pause button. The delayed start time you have set is displayed. Delayed start 

countdown starts. “_” symbol next to the delayed start time moves up and down on the display. 

C

Additional laundry may be loaded during the delayed start period.

5. At the end of the countdown, duration of the selected programme will be displayed. “_” will 

disappear and the selected programme will start.