ArcTiv Technologies Server Racks User Manual Download

Page: 12 / 12

USER MANUAL: ARCTIV SERVER & NETWORK RACKS

ATSVR-NWR-MANUAL-01

WARRANTY

2-Year Limited Warranty. Seller warrants this product, if used in accordance with all applicable instructions, to be

free from original defects in material and workmanship for a period of 2 years from the date of initial purchase. If

the product should prove defective in material or workmanship within that period, Seller will repair or replace the

product, at its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE,

ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH

HEREIN.

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate

or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no

representation or warranty as to the suitability or fitness of these devices for any specific application.

If you have questions about this product or need technical support, please contact us or visit our website.

ArcTiv Technologies, LLC
30 N Gould St Ste 22117, Sheridan, WY 82801

Latest Revision: June, 2021

™

Summary of Contents for Server Racks












